References from real PV projects
Solar parks · C&I installations · Utility projects · Repowering
Proven in PV projects worldwide
REFU solutions are used in PV systems of all sizes—from industrial rooftops to utility-scale solar parks. In every project, inverters, control, and monitoring work seamlessly together—for stable operation, centralized control, and efficient day-to-day processes.
UTILITY · 15 MW · ROMANIA
42 inverters were installed and commissioned in a very short time, ensuring maximum efficiency and a smooth project execution.
REPOWERING · 1.4 MW · GREECE
New regulatory requirements implemented – without downtime during ongoing operations.
UTILITY · LARGE-SCALE
Centralized monitoring and control of large PV systems – for stable performance and minimal operational effort.
COMMERCIAL & INDUSTRIAL · GERMANY
Integration of old and new inverter generations – without additional operational effort.
“Our collaboration with REFU has been defined by reliability and efficiency. The REFUsol 350K inverters performed flawlessly in our projects, giving us the confidence to deliver sustainable energy solutions at the highest standard.”
Solar Eco Systems
Large-Scale PV Projects in Romania – 15 MW Successfully Delivered
PROJECT
Romania
POWER
15 MW
INVERTER
42 x REFUsol 350K
INTEGRATION
REFUlink + REFUview
Three photovoltaic projects in Romania were successfully implemented to support industrial energy supply and significantly reduce overall energy consumption. The objective was to ensure high performance, reliability, and efficient system operation across all installations.
A total of 42 REFUsol 350K inverters were deployed, enabling stable operation and high energy yields while meeting the technical requirements of large-scale PV systems.
Efficient implementation and seamless commissioning
With REFU’s solutions, installation and commissioning were carried out efficiently and in a structured manner. All 42 inverters were successfully commissioned within a very short timeframe, ensuring fast and reliable project execution despite challenging weather conditions.
The integration of REFUlink enabled centralized monitoring and control of all systems. This provides full transparency and simplifies plant management from the very beginning.
Reliable and efficient performance across all installations
Fast and straightforward installation and commissioning
Centralized monitoring and control via REFUlink and REFUview
Strong technical support throughout the entire project lifecycle
- Scalable solution for future PV projects
“REFUlink turned a regulatory challenge into a straightforward modernization of our plants — with minimal effort and high operational reliability.”
Mr. Nikos Mavrogiannis
Repowering of a PV portfolio in Greece – 1.4 MW
PROJECT
Greece
POWER
1,4 MW
INVERTER
REFUsol
INTEGRATION
REFUlink + REFUview
Three existing PV plants in Greece had to be retrofitted to comply with new grid operator requirements for active power control and remote shutdown. The objective was to implement the regulatory requirements without interrupting ongoing plant operation.
Retrofit to meet new grid requirements
With REFUlink, one gateway was installed per plant, enabling centralized power control and communication with the grid operator. At the same time, the existing REFUsol inverters were integrated into modern monitoring and control structures.
Compliance with new regulatory requirements for power control
Modernization of existing inverters through new communication interfaces
Simplified replacement of individual inverters without reconfiguration
Centralized monitoring of all plants via REFUview
“The transition to REFU was implemented without delays. Direct access to technical support and the reliable implementation of all regulatory requirements were key factors for the success of this project.”
Project Manager
Utility solar park in Germany – 5.6 MW successfully implemented under new regulatory requirements
PROJEKT
Rendsburg, Germany
LEISTUNG
5,6 MW
WECHSELRICHTER
16 × REFUsol 350K
INTEGRATION
REFUlink + REFUview
A 5.6 MW utility-scale solar park in Rendsburg was successfully commissioned in early 2026. During the planning phase, the operator decided to switch from an international supplier to REFU due to increasing regulatory requirements, the need for full system control and the preference for a German-based solution.
The system design was adapted within a short timeframe and implemented without delaying the overall project schedule.
Reliable implementation under real utility conditions
During commissioning, a third-party plant controller (EZA controller) was not yet fully operational. A REFU service engineer supported directly on site, identified a wiring issue in the communication bus and ensured immediate system readiness.
With REFUlink and REFUview, all grid operator and certification-relevant parameters were centrally configured and documented. The plant was successfully certified and is now operating reliably.
- Designed for regulatory requirements (including NIS2-ready) and full system control
- Fast system redesign and implementation without project delays
- Direct technical support with a dedicated contact and phone access
- Central parameterization and support during the certification process
- Seamless integration of existing and new inverter systems
“The combination of reliable technology, direct support, and ease of use has significantly simplified and accelerated our processes.”
Project manager, Pohlensolar
C&I reference project – Pohlensolar
PROJECT
Germany
APPLICATION
Commercial & Industrial
INVERTERS
REFUsol (mixed generations)
INTEGRATION
REFUlink + REFUview
Pohlensolar implements PV systems nationwide for major food retailers and discount chains. The focus is on efficient operation, minimal downtime, and ease of use for their own technicians.
This is exactly where REFU proved convincing—with reliable technology, well-designed system integration, and direct support in day-to-day operations.
A key advantage is repowering in mixed operation: existing and new REFU inverter generations work seamlessly together. When replacing individual units, parameters no longer need to be transferred manually—settings and even production history are retained.
With REFUlink and REFUview, systems can be centrally monitored, analyzed, and controlled. For technicians, this means fewer on-site visits, reduced effort, and significantly more efficient workflows.
With this combination of technology, ease of use, and personal support, Pohlensolar has significantly streamlined its processes—and is well prepared for future projects.
- Mixed operation of old and new inverter generations without additional effort
- Remote analysis and parameter management via REFUlink and REFUview
- Time savings through automatic parameter transfer and retention of production history
- Direct technical support and hands-on training on site
Let’s work together to optimize your system.
REFU is not just a supplier, but a technical partner for your PV infrastructure.
Analysis of your existing plant and identification of opportunities for optimization
Development of future-proof solutions for repowering and expansion
Direct access to experienced service technicians
Prompt support for technical challenges